4–22 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUALCHAPTER 4: INTERFACES4.4 Working with Settings and Settings Files4.4.1 Engaging a DeviceThe EnerVista 469 Setup software may be used in on-line mode (relay connected) todirectly communicate with a 469 relay. Communicating relays are organized and groupedby communication interfaces and into sites. Sites may contain any number of relaysselected from the SR or UR product series.4.4.2 Entering SettingsThe System Setup page will be used as an example to illustrate the entering of settings. Inthis example, we will be changing the current sensing settings.Z Establish communications with the relay.Z Select the Settings > System Setup menu item. This can be selectedfrom the device settings tree or the main window menu bar.Z Select the PHASE CT PRIMARY settings by clicking anywhere in theparameter box. This will display three arrows: two to increment/decrement the value and another to launch the numerical calculator.Z Click on the arrow at the end of the box to display a numerical keypadinterface that allows you to enter a value within the settings rangedisplayed near the top of the keypad:Z Click Accept to exit from the keypad and keep the new value.
