GE 469 Instruction Manual
Also see for Masoneilan 469 Series: Instruction manualInstruction manualCommunications guideInstruction manualInstruction manual
                                                                                                                                                                                                                                                                                                                                                | |
Contents
|
5–14 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUALCHAPTER 5: SETTINGSprogrammable messages can be created and displayed (message scratchpad). Forexample, the relay can alternately scan a motor identification message, the current ineach phase, and the hottest stator RTD. Default messages are shown in this subgroup.Use the following procedure to add default messages:1. Enter the correct passcode for the S1 469 SETUP Z PASSCODE Z ENTER PASSCODE FORACCESS settings (unless the passcode has already been entered or the passcodeis “0”, defeating the passcode security feature).2. Move to the message to be added to the default message list using theMESSAGE T and MESSAGE S keys. The selected message can be any actualvalue or Message Scratchpad message.3. Press ENTER. The message PRESS [ENTER] TO ADD DEFAULT MESSAGES willbe displayed for 5 seconds.4. Press ENTER again while displayed to add the current message to the defaultmessage list.5. If the procedure was followed correctly, the DEFAULT MESSAGE HAS BEENADDED flash message will be displayed:6. To verify that the message was added, view the last message in the S1 469 SETUPZV DEFAULT MESSAGES subgroup.Use the following procedure to remove default messages:1. Enter the correct passcode for the S1 469 SETUP Z PASSCODE Z ENTER PASSCODE FORACCESS settings (unless the passcode has already been entered or unless thepasscode is “0”, defeating the passcode security feature).2. Select the message to remove under the S1 469 SETUP ZV DEFAULT MESSAGES sub-group.3. When the default message to be removed is shown, press ENTER. The relay dis-plays the PRESS [ENTER] TO REMOVE DEFAULT MESSAGE message.4. Press ENTER to remove the current message from the default message list.5. If the procedure was followed correctly, the following flash message will be dis-played:5.2.6 Message ScratchpadPATH: SETTINGS Z S1 469 SETUP ZV MESSAGE SCRACTHPADDEFAULT MESSAGEHAS BEEN REMOVEDMESSAGE [TEXT 1 Range: 40 alphanumeric charactersMESSAGE TEXT 2 Range: 40 alphanumeric charactersMESSAGE TEXT 3 Range: 40 alphanumeric charactersMESSAGE TEXT 4 Range: 40 alphanumeric charactersMESSAGE GE MULTILIN469 MOTOR RELAYRange: 40 alphanumeric characters |
Related manuals for GE Masoneilan 469 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine