4–36 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUALCHAPTER 4: INTERFACESZ Locate the firmware file to load into the 469.The firmware filename has the following format:FIGURE 4–6: Firmware File FormatThe EnerVista 469 Setup software automatically lists all filenames beginning with ‘30’.Z Select the appropriate file.Z Click OK to continue.The software will prompt with another Upload Firmware Warning window. This will be thefinal chance to cancel the firmware upgrade before the flash memory is erased.Z Click Yes to continue or No to cancel the upgrade.The EnerVista 469 Setup software now prepares the 469 to receive the new firmware file.The 469 will display a message indicating that it is in Upload Mode. While the file is beingloaded into the 469, a status box appears showing how much of the new firmware file hasbeen transferred and how much is remaining, as well as the upgrade status. The entiretransfer process takes approximately five minutes.The EnerVista 469 Setup software will notify the user when the 469 has finished loading thefile.Z Carefully read any displayed messages.Z Click OK to return the main screen.30 I 500 A8 . 000Modification Number (000 = none)GE Multilin use onlyFirmware VersionRequired 469 hardware revisionProduct code (30 = 469)
