Replacing the Network AdapterIf a network adapter is replaced, the network administrator must be notified so that the client IP addressesused by the system can be updated. In addition, the operating system configuration of the networkcontroller may need to be changed in order to enable system startup. Also check to ensure that any clientor server that accesses this system is updated.Determining Location CodeIf you have an error code in the form 2xxx xxxx or Exxx, and no location code associated with it, thelocation code may possibly be found in three places, depending on the state of the system:v For systems with AIX installed: if the system will boot into AIX, the location code will be reported whenerror log analysis is run under AIX diagnostics.v If the system will boot into the system management services (SMS) menus, the SMS error log willcontain the location code associated with the error code. See “View Error Log” on page 268.v If the system halted when the error occurred, the error code and location can be found in the LCDprogress indicator log, which can be accessed using the service processor menus. See “SystemInformation Menu” on page 238, then select Read Progress Indicators From Last System Boot. Findthe error code in the list that directed you to this note, and the location code should be a part of theentry in the log.Chapter 5. Error Code to FRU Index 161
