Connect the CablesUse the following steps to connect the cables to your HMC. Look for the small icons on the back of yourHMC, that show where to attach the keyboard, mouse, and display cables.1. Attach the monitor cable to the monitor connector and tighten the screws.2. If a label for the monitor was shipped with your system, attach the label to the bottom right corner ofthe monitor.3. Attach the power cables to the monitor (item 1 in illustration on page 420). If the HMC has a voltageswitch, ensure that it is in the correct position for the supply voltage.Attention: Do not plug the power cables into an electrical outlet at this point.4. Connect the mouse and keyboard to their connectors as shown in the following illustration.420 EserverpSeries 615 Service Guide
