expect "2\r" timeout 10 # Pick up second ring# or timeout.# Expect a connection response.expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r"timeout 60donepage: send "ATDT%N,,,,%R;\r" # %N = pager call center number# Add enough commas to wait for# time to enter paging number.# %R = paging number# Confirm successful command.expect "0\r" timeout 60delay 2 # Wait before hanging up.send "ATH0T\r" # Hang up.expect "0\r" timeout 2 # Confirm successful command.doneripo: send "AT&F0Q0T\r" # Reset modem. Select profile 0ignore "0\r" or "OK\r\n" timeout 2 # Ignore modem response.send "ATE0T\r" # Initialize modem: Echo OFF,expect "0\r" or "OK\r\n" timeout 2 # Enable responses (Numeric),send "ATQ0V0X0T\r" # Limit response codes.expect "0\r" timeout 2 # Confirm commands successful.send "ATS0=0\r" # Set AutoAnswer OFFexpect "0\r" timeout 2 # Confirm command successful.send "AT&C1&D2&R1\r" # Detect carrier and DTR,# Ignore RTS.expect "0\r" timeout 2 # Confirm command successful.done # RI Power On enabled.error: # Handle unexpected modem# responses.expect "8\r" or "7\r" or "6\r" or "4\r" or "3\r"delay 2doneSample File modem_f1.cfg## COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP F1## FUNCTIONS: Modem configuration file for many recent Hayes* compatible modems.# This example uses the AT&F1 reset command to choose the factory defaults.# This set up is for modems with extended (&) commands and which do not work# properly with setup F0. For early vintage modems, setup Z or Z0 is# recommended.## * Trademark of Hayes Microcomputer Products, Inc.## (C) COPYRIGHT International Business Machines Corp. 1996# All Rights Reserved# Licensed Materials - Property of IBM## US Government Users Restricted Rights - Use, duplication or# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.### If the modem has configuration switches, they should be set to the# factory default settings.456 EserverpSeries 615 Service Guide
