Modem Configuration Sample FilesSample File modem_m0.cfg## COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP: modem_m0## FUNCTIONS: Modem configuration file specifically for IBM 7852-400# modem with Auto-Reliable feature. This feature must be turned off# for Catcher calls. This example uses the AT&F reset command to# choose the factory defaults.## (C) COPYRIGHT International Business Machines Corp. 1996# All Rights Reserved# Licensed Materials - Property of IBM## US Government Users Restricted Rights - Use, duplication or# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.### The modem has configuration switches. They should be set to the# factory default settings, except switches 11 and 12. These must be# to UP ("AT" responses) and DOWN (Asynchronous operation), respectively.ICDelay 1DefaultTO 10CallDelay 120## %N Call-Out phone number %R Return phone number### PROGRAMMING NOTE: No blanks between double quote marks (").condout: send "AT&F&E2E0T\r" # Reset to factory defaults# Reliable mode# Echo offignore "0\r" or "OK\r\n" timeout 2 # Ignore modem response.send "AT&E12&E14\r" # Disable pacing# Disable data compressionexpect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful.send "AT&SF1&S0S9=1\r" # DSR independent of CD# Force DSR on.# CD respond time=100msexpect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful.send "ATV0S0=0\r" # Numeric response code# Auto-Answer offexpect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful.doneconnect: send "ATDT%N\r" # Tone dialing command.# %N from Call Home setup.# Expect a connection response.expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or"19\r" or "13\r" or "12\r" or "1\r" busy "7\r"timeout 60doneretry: send "A/" # Repeat the previous command.# Expect a connection response.expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" orAppendix G. Modem Configurations 441
