CAUTION:This product is equipped with a three-wire power cable and plug for the user’s safety. Use thispower cable with a properly grounded electrical outlet to avoid electrical shock.C01CAUTION:This unit has more than one power supply cord. To reduce the risk of electrical shock, disconnecttwo power supply cords before servicing.C21Handling Static-Sensitive DevicesThe following procedures describe how to handle static-sensitive devices.Attention: Electronic boards, adapters, media drives, and disk drives are sensitive to static electricitydischarge. These devices are wrapped in antistatic bags to prevent this damage.Take the following precautions:v If you have an antistatic wrist strap available, use it while handling the device.v Do not remove the device from the antistatic bag until you are ready to install the device in the system.v With the device still in its antistatic bag, touch it to the metal frame of the system.v Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the solder joints orpins.v If you need to lay the device down while it is out of the antistatic bag, lay it on the antistatic bag. Beforepicking it up again, touch the antistatic bag and the metal frame of the system at the same time.v Handle the devices carefully to prevent permanent damage.280 EserverpSeries 615 Service Guide
