Attach the Mounting Hardware to the Rack EnclosureBefore performing this procedure, read through each step and study the illustrations.Attention: Mounting the rails is a complex procedure. To install the rack rails correctly, you must read,and then perform each procedure step in the order given. Failure to perform each step in the order givenmay cause rail failure.To install the rack-mounting hardware into the rack, do the following:1. Locate the rack-mounting hardware kit, rack-mounting template, and the system rails that wereshipped with your system.1 Rack-Mounting Template2 Rack-Mounting Hardware Kit3 System Rail AssembliesNotes:1. The system rails are front-to-back and left-to-right side dependent when you are standing in thefront of and facing the rack. The rails can be identified by the two large latch assemblies on therear of each rail. See the following illustration to orient yourself to the left and right railassemblies.408 EserverpSeries 615 Service Guide
