Disk Drive Bezels and FillersThe following procedures describe the removal and replacement of disk drive bezels. Before performingthe following procedures, read the “Safety Notices” on page xi. Each disk drive slot in the system mustcontain either a disk drive or the appropriate filler panel.Removing a Disk Drive Bezel from a Disk Drive or Disk Drive FillerTo remove a disk drive bezel from a disk drive or filler, do the following:1. Remove the filler panel from the disk drive slot, or follow the procedures for removing a disk drivedescribed in “Hot-Swap Disk Drives” on page 333.2. Remove the disk drive bezel from the front of the filler panel or disk drive. See the following illustration.3. Attach the disk drive bezel to the front edge of the filler panel or replacement disk drive.4. Place the filler panel in the empty disk drive slot, or follow the procedures for adding a disk drive asdescribed in “Hot-Swap Disk Drives” on page 333.1 2 3 4451 Disk Drive Filler Panel, UpsideDown with Bezel Attached4 Disk Drive Bezel2 Disk Drive Bezel Handle 5 Disk Drive3 Disk Drive Filler Panel ReleaseTabChapter 9. Removal and Replacement Procedures 331
