Forwarding your calls / 89P0881591 Issue 01 Modular ICS 4.0 System Coordinator GuideCanceling Line Redirectionƒ£°›1. Press ƒ£°›.2. Select the lines you no longer want to be redirected.Allowing a telephone to redirect callsYou can turn a telephone’s ability to redirect calls on and off.You need the programming template found at the front of thisguide. See “Getting started with Norstar” on page 1 for moreinformation.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of thetelephone you want to program.4. Press ≠ twice.5. Press “ four times. The display readsAllow redirect:.Tip -The line chosen for redirecting calls on other linescan be used normally when it is not busy on a redirectedcall. To avoid redirection failing because the chosen line isin use, choose a line pool with several lines in it.The system does not check that the number you give forline redirection is a valid one. If you redirect to an invalidnumber, redirection fails. Using an autodial button to enterthe redirection number helps avoid this possibility. Anautodial button used for line redirection must beprogrammed to use a specific line.
