118 / Customizing your telephoneModular ICS 4.0 System Coordinator Guide P0881591 Issue 01Applying button cap labelsBefore you apply button labels, activate the Button Inquiryfeature (ƒ•‚) to verify the button functions, andto avoid activating features as you put the labels onto thebuttons. For more information refer to “Finding out what abutton does using Button Inquiry” on page 115.If you are checking a speed dial button, enterthe two-digit speed dial code that you want tocheck.Enter the feature code, or press ® or QUITto quit programming or CLEAR to clear thenumbers you have entered. The systemaccepts the entry as soon as you enter avalid feature code.Press ƒ and enter the feature codeyou want to assign to the button. You cannotenter invalid codes.You have programmed a button with afeature that was already programmed ontoanother button. The feature has moved to thebutton you just programmed. Its originalbutton is now blank.Press the button you want to check. Pressƒ or EXIT when you are finished.Enter the number you want to program andpress ˙. To erase the button, justpress ˙.Enter the number you want to program andpress OK. To erase the button, just press˙ or OK.For other displays, see “Common feature displays” on page 203.Enter code:F__QUIT CLEARFeature code:QUITFeature movedPress a buttonEXITProgram and HOLDProgram and OKQUIT OK
