138 / Programming Hunt GroupsModular ICS 4.0 System Coordinator Guide P0881591 Issue 01Moving members of a groupMember order within a Hunt Group is important. The memberorder determines how a call is routed through a Hunt Group.1. Place the programming overlay on any M7310 or M7324telephone.2. Press ƒ••¤flfl‹›› (CONFIG).The display shows Password:.3. Press ‡¤‡fi°‡ (SCPLUS). The display showsTerminals&Sets.4. Press ‘ until the display shows Systemprgrming.5. Press ≠. The display shows Hunt groups.6. Press ≠. The display shows Show group.7. Enter the Hunt Group number you want to program (1-30).8. Press ≠. The display shows Member DNs:.9. Press ≠. The display shows the members for thatgroup.10. Press MOVE to move an existing member to another placewithin the Hunt Group. The display shows the membernumber followed by an arrow.11. Enter the new position number for the extension.12. Press ® to exit or ‘ to continue programming.Assigning or unassigning lines to a groupConfigure the prime set for a Hunt Group’s line to None toavoid delayed ring transfer of external Hunt Group calls to theprime set before the Hunt Group can receive the call.A line can be assigned to only one group.
