Using System features / 177P0881591 Issue 01 Modular ICS 4.0 System Coordinator GuideMaking a telephone a hotline telephoneYou can set up a telephone as a hotline.You need the programming template found at the front of thisguide. See “Getting started with Norstar” on page 1 for moreinformation.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ at Terminals&Sets.4. Enter the internal number of the telephone you want toprogram and press ≠. The display readsCapabilities.5. Press ≠.6. Press ‘ until the display reads Hotline.7. Press CHANGE to select the type of call the hotline makes:None, Intrnl, or Extrnl.Internl assigns an internal number.External assigns an external number. If you select an externalnumber, you can select the line on which the call is made: theprime line, an external line, a line in a line pool, or a lineselected by the routing table. If you select a line pool, you mustspecify the line pool access code. If you select the routingtable, the number dialed is treated as a destination code and isrouted according to the routing tables.Tip -A Hunt Group set DN can be specified as a Hotlinetelephone. For more information on Hunt Groups see“Programming Hunt Groups” on page 135.
