38 / Answering callsModular ICS 4.0 System Coordinator Guide P0881591 Issue 01Answering any ringing telephone using Group Pickupƒ‡fiYour Norstar system can be divided into nine pickup groups.If you are a member of a pickup group, you can pick up a callthat is ringing at any telephone in your pickup group.Press ƒ‡fi.Group Pickup cannot be used to retrieve a camped call.If there is more than one incoming call at a telephone in apickup group, a call ringing on an external line is answeredfirst followed by calls on the prime line and, finally, calls oninternal lines.Changing a telephone’s pickup groupTelephones can be put into and taken out of pickup groups.You need the programming template found at the front of thisguide. See “Getting started with Norstar” on page 1 for moreinformation.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of thetelephone you want to program.4. Press ≠ twice.Tip -A Hunt Group call ringing at a Norstar set DN thatis also a member of a call pickup group can be picked upby any Norstar set in that call pickup group. For moreinformation on Hunt Groups see “Programming HuntGroups” on page 135.
