102 / Communicating in the officeModular ICS 4.0 System Coordinator Guide P0881591 Issue 01Removing items from your message listYou can erase a message while you are viewing it in yourmessage list. If the message is from your voice message center,this only erases the message notification at your telephone.You need to erase the voice message at your voice messagecenter. Refer to your voice message center documentation.On a telephone with a one-line displayPress ˙.On a telephone with a two-line displayPress ERASE.Removing items from your message list using an analogtelephone connected to an ASMTo remove both internal and external messages on an analogtelephone connected to an Analog Station ModulePress ˚£flfi to invoke the Cancel MessageWaiting feature.On analog telephones connected to an ASM, the CancelMessage Waiting feature cancels the oldest message received.Tip -If there is no voice mail system installed, only thedesignated direct-dial telephone can send messages toan analog telephone connected to an Analog StationModule (ASM) using ƒ⁄. The analog telephonecan in turn invoke a single digit access code to reach thedesignated direct-dial telephone and retrieve messages.If the designated direct-dial telephone of an analogtelephone connected to an Analog Station Module (ASM)is changed, messages sent by the previous designateddirect-dial telephone are kept in the incoming message listof the analog telephone until they are retrieved.