P0881591 Issue 01 Modular ICS 4.0 System Coordinator GuideUser PreferencesThe User Preferences section of programming allows you toprogram memory buttons, speed dial codes and other settingsfor any Norstar telephone on the system.For example, an employee may want to have the Do NotDisturb feature programmed onto a memory button or create aspeed dial code. Instead of programming from the employee’stelephone, you can go into programming on the telephonenearest you to make the change.Using User Preferencesƒ••°‡‹‡1. Press ƒ••Ë͉Â(ƒ••°‡‹‡).2. Enter your System Coordinator or Basic password (thedefault passwords are ¤‹fl›fl and¤¤‡›¤).By using a Basic password, it is possible to have someone elsedo day-to-day upkeep of people’s telephones without givingout access to sensitive programming. See “Using passwords”on page 171.After you enter the proper password, the display shows you thetelephone with the lowest internal number followed by itsname (For example, 221:Reception).1. Press ‘ to move through all the telephones on thesystem.2. Press ≠ when you see the telephone you want tochange. The display reads the model number of the
