64 / Time savers for making callsModular ICS 4.0 System Coordinator Guide P0881591 Issue 01If you select a line before pressing the autodial button, the callgoes out on the line you have selected instead of the line thatis part of the autodialer programming.For the M7100 telephone, an external autodialer can beprogrammed only by using a line and not a line pool.Using intercom as the line for AutodialIf you press ∆ as the line for an external autodialnumber, you must include a valid line pool access code or adestination code. If line pool access codes or destination codesare changed, remember to reprogram autodial numbers.DisplaysTip -If you do not include a line selection in an autodialnumber, the call uses your prime line (if you have one).Continue to enter digits until the number iscomplete. Press √ or BKSP toerase an incorrect digit. Press ˙ orOK when you are finished.The memory allotted to autodial numbers inyour Norstar system is full.While programming external Autodial, youerased the button by pressing ˙ orOK before entering any digits.Enter the number you want to program(choosing the line first if necessary) exactlyas if you were making a call.Enter the internal telephone number youwant to program.987___QUIT BKSP OKAutodial fullButton erasedEnter digitsQUIT OKIntercom #: ___QUIT
