42 / Answering callsModular ICS 4.0 System Coordinator Guide P0881591 Issue 013. Press the button where the first call is on hold to create aconference.Only the person who established the conference can processthe conference by using the procedures described in thissection.Disconnecting one partyYou can disconnect one party from a conference and continuetalking to the other.On an M7208, M7310 or M7324 telephone:1. Press the line button of the call that you want to disconnect.The call that you want to keep is automatically put on hold.2. Press ®. The call is disconnected.3. Press the line button of the held call to speak to theremaining person.On an M7100 telephone:1. Press ƒ£‹, to place one caller on hold. Press˙ again, to put the caller you want to keep onhold.2. Press ®. The call is disconnected.3. Press ˙ to speak to the remaining party.Tip -You can create a conference by releasing privacyon a call. See “Turning Privacy on or off for a call” on page49.
