User Preferences / 131P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide7. Press ‘ and choose the line (or enter a code for aline pool) the speed dial code should use.Use the line pool code to select a particular line pool for usewith Speed Dial. If you select Use routing tbl, a line or poolis chosen by the routing programming according to the initialdigits in the number.The route you choose for a User Speed Dial code must be onethat the telephone can use. For example, if the telephone doesnot have access to Line Pool B and you use that pool code withthe speed dial code, the code does not work.To change a system speed dial code, see “Adding or changinga system speed dial” on page 17.Changing Call Log options1. Press ≠ at Call log opt’ns….2. Press CHANGE until you see the option you want to use. See“Call Log options” on page 108.Changing how calls are dialed1. Press ≠ at Dialing opt’ns….2. Press CHANGE until you see the option you want to use.Descriptions for dialing options are found on theTelephoneFeature Card, or see “Changing how you dial your calls” onpage 57.Changing the language used on the displayPress CHANGE at Language: until you see the language youwant to use. See “Changing the language on the display” onpage 116.