174 / Using System featuresModular ICS 4.0 System Coordinator Guide P0881591 Issue 01Clearing a Call Log passwordIf an individual has forgotten their Call Log password, you canclear it in programming. The individual can then enter a newpassword from his or her telephone.You need the programming template found at the front of thisguide. See “Getting started with Norstar” on page 1 for moreinformation.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ‘ four times.4. Press ≠ at Passwords.5. Press ‘ until the display reads Call log pswds.6. Press ≠ and enter the internal telephone numberof the telephone where you want to clear the Call Logpassword.7. Press ≠, then press CLR to clear the password.Using special telephonesDirect-dialYou can reach the direct-dial telephone by dialing a singledigit. The direct-dial telephone is usually in a central location,such as a attendant’s desk. You can have up to five direct-dialtelephones for your Norstar system. It is usually the primetelephone or the central answering position (CAP).The direct-dial telephone can send up to 30 messages and caninvoke Services to activate the extra-dial telephone.