Answering calls / 41P0881591 Issue 01 Modular ICS 4.0 System Coordinator GuideSee the Norstar Modular ICS 4.0 Installer Guide for moreinformation.M7100N telephones and ISDN terminals cannot be assignedAnswer buttons to monitor other sets, but they can bemonitored.You cannot make calls using Answer buttons.If more than one call is ringing at someone’s telephone, thefirst call appears on the attendant’s Answer button. Anysubsequent calls appear on intercom buttons, if they areavailable.Creating a Conference Callƒ‹You can talk to two people at once.1. Make sure you have two calls, one active and one on hold.2. Press ƒ‹.3. Press the appropriate button to retrieve the held call (this isautomatic on the M7100 telephone).You can create a conference when you are on a call.1. Make a second call.2. Press ƒ‹.Tip -More than one attendant may have an Answerbutton for a single telephone. This allows two or moreattendants to handle calls for a busy person.Each telephone can handle calls for up to eight otherpeople using a separate Answer button for each person.