P0881591 Issue 01 Modular ICS 4.0 System Coordinator GuideHandling many calls at onceUsing HoldYou can temporarily suspend a call by pressing ˙.When a call is on hold, its indicator flashes on all telephonesthat have access to the line. The call can be retrieved from anyof these telephones.On the M7100 telephone, ˙ alternates between twolines; one active, one on hold. The M7100 telephone cannotretrieve a call placed on hold by another telephone.Retrieving a held callYou can connect to a call on hold by pressing the flashing linebutton of the held call.Holding automaticallyIf your line has been programmed with full autohold, you canswitch from one call to another and have your calls put on holdautomatically.Press the line button of the caller you want to speak to. Yourcurrent caller is put on hold automatically.Listening on holdIf you have been put on hold, you can hang up the receiverwhile you wait for the other person to return.1. Press ˙.Tip -Answered Hunt Group calls can be placed on holdat the answering Norstar set. For more information onHunt Groups see “Programming Hunt Groups” on page135.