44 / Answering callsModular ICS 4.0 System Coordinator Guide P0881591 Issue 012. Take the held call off hold. This is not necessary for theM7100 telephone.Removing yourself from a conferenceƒ‡‚You can remove yourself from a conference, and connect theother two callers through your Norstar system.Enter the Transfer feature code ƒ‡‚.When you remove yourself from a conference using theTransfer feature, and both callers are from outside yoursystem, one of the callers must have called you on a disconnectsupervised line, or the call is be disconnected.DisplaysYou are trying to add a fourth party to yourconference call, or to join two conferencestogether. Release one call from theconference before adding another, or keepthe two conferences separate.You have put a conference call on hold.You have tried to make a conference call, butyour system is already handling its maximumnumber of conference calls.You are on a conference with the two lines ortelephones shown. You can drop out of theconference and leave the other two partiesconnected (Unsupervised Conference) bypressing TRANSFER or entering the Transferfeature code.You have activated the Conference featurewith one call active and another on hold.Press the line of the call on hold to bring thatperson into the conference.For other displays, see “Common feature displays” on page 203.3 parties onlyConf. on holdConference busyLine001 221TRANSFERPress held line
