Programming capabilities 109P0607114 Issue 01 Compact Plus System Administration GuideAuxiliary ringerAn auxiliary ringer is a separate external telephone ringer or bellthat must be connected by the installer. The installer programs theauxiliary ringer to ring for calls on a particular line inprogramming. An auxiliary ringer can also be programmed toring for a line placed in a Service mode. The extension default forauxiliary ringer is No.See ‘Chart 12: Extension capabilities 4’ on page 325 in AppendixA for a programming overview.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ¤‹fl›fl (ADMIN). The display showsTerminals&Extns.4. Press ≠. The display shows Show extn#:.5. Enter the extension number of the telephone you wish toprogramme. The display shows nnn:nnn.6. Press ≠ twice. The display shows Fwd no answer.7. Press ‘ until the display shows Aux. ringer.8. Press CHANGE to choose Y (Yes) or N (No).9. Press ® to exit or ‘ to continue programming.To use the auxiliary ringer with Night service, you mustprogramme under Services.Activating Redirect ringAs the administrator, you may want to programme the system toremind people when a line is being redirected. Redirect ring alertsyour extension with a brief ring when a call is redirected on oneof its lines.See ‘Line redirection’ on page 276 for information on using thisfeature.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ¤‹fl›fl (ADMIN). The display showsTerminals&Extns.4. Press ≠. The display shows Show extn#:.
