Programming feature settings 139P0607114 Issue 01 Compact Plus System Administration GuideDirected (call) pickupThe Directed pickup feature allows someone to pick up calls thatare ringing at another telephone by entering ≤‡fl and theextension number. You can enable or disable Directed pickup forthe system. The default is Yes, which means that Directed pickupis enabled.See ‘Answering a telephone using Directed Pickup’ on page 240for information on using this feature.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ‡¤‡fi°‡ (SAPLUS). The display showsTerminals&Extns.4. Press ‘ until the display shows System prgrming.5. Press ≠. The display shows Hunt groups.6. Press ‘ until the display shows Featr settings.7. Press ≠. The display shows Backgrnd music.8. Press ‘ until the display shows Directd pickup:.9. Press CHANGE to choose Y (Yes) or N (No).10. Press ® to exit or ‘ to continue programming.Page toneYou can choose whether a tone sounds before a page begins.See ‘Paging’ on page 270 for information on using the Pagingfeature.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ‡¤‡fi°‡ (SAPLUS). The display showsTerminals&Extns.4. Press ‘ until the display shows System prgrming.5. Press ≠. The display shows Hunt groups.6. Press ‘ until the display shows Featr settings.7. Press ≠. The display shows Backgrnd music.8. Press ‘ until the display shows Page tone:.9. Press CHANGE to choose Y (Yes) or N (No).10. Press ® to exit or ‘ to continue programming.
