Services 163P0607114 Issue 01 Compact Plus System Administration GuideSpecifying the type of line to be usedEach route allows you to programme the line pool, and, thus, thetype of line to be used as the outgoing facility to reach adestination. For example, if ISDN lines have been placed in LinePool B, specifying pool B as the line pool to use in a route for aparticular destination code ensures that all calls being routed tothat destination use ISDN lines.You must ensure that extensions and ISDN terminals have accessto the line pools that they need to make calls (programmed underLine Access in Lines).See "Chart 19: Routing service" on page 330 in Appendix A fora programming overview.Programming routesDial Out1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ‡¤‡fi°‡ (SAPLUS). The display showsTerminals&Extns.4. Press ‘ until the display shows Services.5. Press ≠. The display shows Ringing service.6. Press ‘ until the display shows Routing service.7. Press ≠. The display shows Routes.8. Press ≠. The display shows Show route:.9. Enter a three-digit route code or press ‘.10. Press ≠. The display shows DialOut:.11. Press CHANGE.12. Enter the Dial Out digits (up to 24) or press CANCL to chooseNo number.You can press ≤‡° to insert a 1.5-second pause in thedialling string, if necessary.Route 000 shows no DialOut:No numbr by default andcannot be changed.13. Press OK.
