182 Remote accessCompact Plus System Administration Guide P0607114 Issue 01Programming lines and features for remote accessRemote access packagesRemote access packages allow you to control the remote use ofCompact Plus line pools, the paging feature, administration, andmonitoring of the system.You create a remote access package by defining which of yoursystem line pools it will be able to access and whether it can usePage, line pools, and remote administration. You then assign thepackage to individual lines (using Rem line access), and to aparticular Class of Service password.Remote access packages defaultsYou can use COPY and the keypad to copy settings from oneremote package to another.The line pool access display shows an alphabetic line poolidentifier, followed by a numeric line pool access code inparentheses (for example, PoolA (9):N). If no access code hasbeen identified, there is nothing between the brackets (forexample PoolA ( ):N). The line pool access code can beprogrammed under Terminals&Extns.Remote access package 00 is the default setting for the Remoteaccess package setting. It does not permit access to line pools orto remote paging. Unlike packages 01 to 15, package 00 cannotbe changed.You can define up to 15 remote access packages (01 to 15).For remote users who call into the Compact Plus system to uselines for calling out, the remote restrictions and line restrictionsstill apply.Parameter Square PBX HybridPackage 00 Prohibits remote access to line pools, Page,remote monitoring and administration. Cannotbe changed.Package 01Line pool access Y for Pool AN for Pools B and CRemote Page,administration, andmonitoringNoPackages 02 - 15Line pool access N for Pools A to CRemote Page,administration, andmonitoringNo
