226 Customising your telephoneCompact Plus System Administration Guide P0607114 Issue 01Labelling keys on the telephoneAfter programming a key on your telephone, you may wish tolabel it.Norstar M-series telephones also have key pre-labelled key caps.When you are labelling or removing a key cap, activate KeyInquiry (≤•‚) first so that you do not accidentally activatea feature.Note: On M7100N/T7100 telephones, Key Inquiry shows yourextension number followed by the function assigned toyour single-memory key. This is usually Last NumberRedial.To remove a key cap, slip the fingernails of your index fingersunder each end of the key cap and pull up until it pops off. If youdo not have a printed key cap to replace it, you can write the namein the blank label space beside the key.The T-series telephones are labelled beside the buttons. You canuse Desktop Assistant to make changes and print a new labelcard. Your system administrator can access this application fromthe system CD or download it fromhttp://www.nortelnetworks.com (Customer Support/SoftwareDistribution, under Product Selection choose Desktop Assistant).Moving line keysYou can move exchange lines to different keys on your telephone.Use this feature to arrange your lines as you prefer.1. Press ≤•°⁄.2. Press the key you want to move the line from.3. Press the key you want to move the line to.4. Press ≤ or QUIT when you are finished moving lines.Note: You also use this feature code to move hunt groupappearances.DisplaysExchanged The two keys you selected have exchangedposition.Invalid location You have tried to move a line to a key that cannotbe used as a line key, such as an intercom key,Handsfree/Mute key, or an Answer key.Move line from:QUITPress the key of the line you want to move. Press≤ or QUIT when you have finished movinglines.
