262 Making external callsCompact Plus System Administration Guide P0607114 Issue 01Removing yourself from a conferenceYou can remove yourself from a conference and connect the othertwo callers through your Compact Plus system.Press ≤‡‚ (the Transfer feature code).When you remove yourself from a conference using the Transferfeature and both callers are from outside your system, one of thecallers must have called you on a disconnect supervised line, orthe call is disconnected.Sending Hookswitch or DTMF during a conference callEither system telephone engaged in a three-way conference callover a Network CLID or DS trunk can issue a hookswitch orDTMF dialing request without leaving the conference.• To hear DTMF tones on both telephones during dial, activateLong Tones (FEATURE 808).• To conference in someone through the trunk, use Link(FEATURE 71)Displays3 parties only You are trying to add a fourth party to yourconference call or to join two conferencestogether. Release one call from theconference before adding another, or keepthe two conferences separate.Conf. on hold You have put a conference call on hold.Conference busy You have tried to make a conference call,but your system is already handling itsmaximum of four conference calls.Line001 21TRANSFERYou are on a conference with the two linesor telephones shown. You can drop out ofthe conference and leave the other twoparties connected (UnsupervisedConference) by pressing TRANSFER orentering the Transfer feature code.Press held line You have activated the Conferencefeature with one call active and another onhold. Press the line of the call on hold tobring that person into the conference.
