Programming feature settings 137P0607114 Issue 01 Compact Plus System Administration GuideNetwork callbackIf you transfer a call to a private network destination and the callis not answered, it comes back to you after a specified time.Network callback defines the time, in seconds, before a call isreturned to your extension.Since the time required to transfer a call across the privatenetwork varies depending on the complexity of your privatenetwork, you may need to experiment to achieve the correctsetting.Note: Depending on how a private network call is routed, it maynot always be possible for the system to return atransferred call.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ‡¤‡fi°‡ (SAPLUS). The display showsTerminals&Extns.4. Press ‘ until the display shows System prgrming.5. Press ≠. The display shows Hunt groups.6. Press ‘ until the display shows Featr settings.7. Press ≠. The display shows Backgrnd music.8. Press ‘ until the display shows Netwk callbk:.9. Press CHANGE to choose 15, 30, 45, 60, or 90 seconds.10. Press ® to exit or ‘ to continue programming.Held line reminder and delayA reminder tone and display message occur at a Norstar/BSTtelephone when a call has been placed on hold for a certain periodof time. The display continues to show the name of the held lineuntil the call is dealt with. In the case of multiple calls on hold,the display shows the name of the line that has been held thelongest. Once that call has been dealt with, the display shows thenumber of the next longest held call.You can switch Held line reminder on or off and set the timebefore the reminder takes effect.The Held line reminder emits a double periodic tone. This tonedistinguishes the feature from the Call Waiting tone, which usesa single periodic tone.
