276 Forwarding callsCompact Plus System Administration Guide P0607114 Issue 01Cancelling Call ForwardTo cancel Call Forward, press ≤£›.Line redirectionIn a networked system, Line redirection allows you to redirectcalls coming in on your external lines to a telephone outside theoffice. You can redirect exchange lines to AC15A private circuits,AC15A private circuits to either exchange lines or privatecircuits, and exchange lines to exchange lines.Compact Plus supports simultaneous redirection of DIA calls,subject to the same barring rules and depending on theavailability of outgoing resources.You may choose to redirect all your exchange lines or only someof them. The incoming trunk must have disconnect supervisionand the outgoing trunk must be answer supervised for LineRedirection to perform properly.You cannot use the Line redirection feature code atM7100N/T7100 and M7000/T7000 telephones, or a telephoneconnected to an Analogue Terminal Adapter.You redirect lines at a telephone, but once redirected, the lines areredirected for the entire system. You can only redirect lines forwhich there are line keys on the telephone you are using.How Line redirection is different from Call ForwardCall Forward forwards all calls that arrive at a particulartelephone to another telephone within the Compact Plus system.Line redirection redirects only the lines you specify, no matterwhich telephones they appear on, to a telephone outside theCompact Plus system. Line redirection takes precedence overCall Forward.Using Line redirectionYou redirect lines at a telephone, but once redirected, the lines areredirected for the entire system.You can only redirect lines that appear at line keys on yourtelephone.When redirecting DIA lines, ensure the outgoing resource is aline pool with sufficient lines to support redirected traffic. Thenumber of appearances for a DIA line is not limited to the numberof appearances on that extension. As many DIA calls areredirected as the outgoing resource permits.
