284 Saving time with featuresCompact Plus System Administration Guide P0607114 Issue 01Using Ring AgainIf you cannot get through to someone on your Compact Plussystem because their telephone is busy or there is no answer, youcan use the Ring Again feature to tell you when they hang up ornext use their telephone. You can also use the Ring Again featureto tell you when a busy line pool becomes available.The Ring Again feature cannot be used with a hunt group.1. Dial the extension number you want to reach.2. Before you hang up, press ≤¤.Cancelling Ring AgainPress ≤£¤.DisplaysEnter code: If you are checking a Speed Dial key, enterthe three-digit Speed Dial code that youwant to check.F_QUIT CLEAREnter the feature code, or press ® orQUIT to quit programming or CLEAR to clearthe numbers you have entered. Thesystem accepts the entry as soon as youenter a valid feature code.Feature code:QUITPress ≤ and enter the feature code youwant to assign to the key. You cannotenter invalid codes.Feature moved You have programmed a key with afeature that was already programmed toanother key. The feature has moved to thekey you just programmed. Its original keyis now blank.Press a keyEXITPress the key you want to check. Press≤ or EXIT when you are finished.Program and HOLD Enter the number you want to programmeand press ≥. To erase the key, justpress ≥.Program and OKQUIT OKEnter the number you want to programmeand press OK. To erase the key, press≥ or OK.Can't ring again You cannot use Ring Again on your currentcall. You can only use Ring Again while youhave a busy signal on an internal call or linepool request, or while an internal call isringing.Ring Again? YESNO EXITPress YES to use Ring Again. Press NO ifyou prefer to send a message.
