116 Programming User preferencesCompact Plus System Administration Guide P0607114 Issue 01Changing the display contrastDisplay contrast allows you to lighten or darken the telephonedisplay to suit the lighting conditions in your office.See ‘Display contrast’ on page 225 for information about usingthis feature.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ¤‹fl›fl (ADMIN). The display showsTerminals&Extns.4. Press ≠. The display shows Show extn#:.5. Enter the extension number of the telephone you wish toprogramme. The display show nnn:nnn.6. Press ≠. The display shows Capabilities.7. Press ‘ until the display shows User prefernces.8. Press ≠. The display shows Model: followed by afive-digit code.9. Press ‘ until the display shows Display cntrst:.10. Press CHANGE to choose 1, 2, 3, 4, 5, 6, 7, 8, or 9.11. Press ® to exit or ‘ to continue programming.Note: You do not see any change in the display of the telephoneyou are using when you are programming Userpreferences from another telephone.Changing the Ring typeSee ‘Ring type’ on page 227 for information about using thisfeature.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ¤‹fl›fl (ADMIN). The display showsTerminals&Extns.4. Press ≠. The display shows Show extn#:.5. Enter the extension number of the telephone you wish toprogramme. The display shows nnn:nnn.
