232 Using personal featuresCompact Plus System Administration Guide P0607114 Issue 01Displays storing and dialling a Personal Speed Dial numberMaking a Speed Dial callTo make a call using a personal or System Speed Dial code:1. Press ≤‚.2. Enter the appropriate three-digit Speed Dial code (001-279).9_CANCL BKSP OKContinue entering the number you wish toprogramme. You can change the numberby pressing BKSP or √. Whenyou are finished, press ≥ or OK.Enter digitsQUIT OKEnter the telephone number you wish toprogramme exactly as you would if youwere dialling it normally. When you arefinished, press ≥ or OK. This messageappears only after you select a line or linepool.Error code: Enter a three-digit number between 256and 279 to select the code forprogramming.No number stored There is no number stored on the speeddial code you have dialled.Program and HOLD On the M7100N, M7208N, T7100 andT7208 telephones, if you want toprogramme a line or line pool selection forthis speed dial number, select the line orline pool. Otherwise, enter the telephonenumber exactly as you would if you weredialling it normally. When you are finished,press ≥.Program and OKQUIT OKIf you want to programme a line or linepool selection for this speed dial number,select the line or line pool. Otherwise,enter the telephone number you wish toprogramme exactly as you would if youwere dialling it normally. When you arefinished, press OK.Select a line There is no line associated with the speeddial number you are trying to use. Select afree exchange line or line pool, and enterthe speed dial feature code again.Unknown number The system cannot dial the numberstored.Re-programme the number.Speed dial> Enter a three-digit number between 001and 279 to select the code for dialling.No free linesLATERAll lines are busy. Press LATER, then YES tohave the system notify you when a line isfree.
