Programming Hospitality Services 49P0607114 Issue 01 Compact Plus System Administration GuideAlarm time (AL) featureThe Alarm time feature provides an alarm clock capability onNorstar/BST telephones and analogue telephones connected to anATA. Both room extensions and common extensions can beprogrammed to sound an audible alert at a requested time.One Alarm time within a 24-hour period is programmable on aroom or common extension and must be reset daily. When thealarm sounds, all telephones in a given room alert. Cancelling thealarm on any telephone cancels the alarm on all the telephones inthe room. A new Alarm time entered on a room or commonextension overwrites any alarm set previously.If the Compact Plus system experiences a mains failure, thefailure can result in missed Alarm times. When the Compact Plussystem is running and the system time resets, the missed Alarmtimes alert on respective room or common extensions. At alltimes, the Compact Plus system allows up to a maximum of 24extensions that can alert at the same time.Programming the Alarm time featureTo programme the Alarm time feature on a Norstar/BSTtelephone:1. Press ≤°‡fi. The display shows Alrm: 07:00amOFF.2. If the alarm time is correct press ON/OFF.The display shows Alrm:07:00am ON. Press DONE to exit.orTo enter a new alarm time press CHG.The display shows Enter time:.3. Enter a new four-digit alarm time.— If the 24-hour clock format is used (hour: 00 to 23 andminutes: 00 to 59), no confirmation is required. Thedisplay shows Alarm ON hh:mm.— If the 12-hour format is used, the display shows hh:mm AMor PM?. Press the AM or PM display key. The display showsAlarm ON hh:mm.
