Passwords 173P0607114 Issue 01 Compact Plus System Administration GuideSetting the Administrator passwordThe Administrator password is one to six digits long and allowsyou to access programming. The default password is¤‹fl›fl, which spells ADMIN on the keypad.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ‡¤‡fi°‡ (SAPLUS). The display showsTerminals&Extns.4. Press ‘ four times. The display shows Passwords.5. Press ≠. The display shows COS pswds.6. Press ‘. The display shows Progrming pswds ˆ.7. Press ≠ until the display shows Sys admin:.8. Press CHANGE and enter the new password.9. Press OK to accept the new password.Erasing the Administrator passwordIf you leave the Administrator password blank (by entering nodigits in step 8), the password is erased. If you erase thepassword, anyone can enter Administrator programming withouta password.Setting the Basic passwordThe Basic password is one to six digits long and allows you toaccess some programming settings using feature codes. Youcannot enter regular programming with this password. Thedefault is ¤¤‡›¤, which spells BASIC on the keypad.1. Place the programming overlay over the appropriate keys onyour programming telephone.2. Press ≤••¤flfl‹›› (CONFIG). Thedisplay shows Password:.3. Press ‡¤‡fi°‡ (SAPLUS). The display showsTerminals&Extns.4. Press ‘ four times. The display shows Passwords.5. Press ≠. The display shows COS pswds.6. Press ‘ until the display shows Progrming pswds.7. Press ≠. The display shows SysAdmin+:.
