2 Basic copy operations2-34 cm6520Specifying the zoom ratio of the document ("Full Size" setting)A copy that is the same size as the document (100%) is produced.0 As the factory default, "Full Size" is selected.0 Touch [+] to enlarge the zoom ratio, and touch [-] to reduce the zoom ratio in 0.1% increments.1 In the Basic screen, touch [Zoom].The Zoom screen appears.2 Touch [Full Size].3 Touch [OK].The Basic screen appears again.Typing in the zoom ratio (XY Zoom setting)By using the keypad, a zoom ratio between 25.0% and 400.0% can be typed in directly without changing theheight-to-width ratio.0 If a value outside the allowable range is specified, the message "Input error" appears. Type a valuewithin the allowable range.If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then specify thecorrect value.0 The entered zoom ratio can be stored. For details on storing zoom ratios, refer to "Storing the desiredzoom ratio" on page 2-41.
