7 Application functions7-58 cm6520? Can any size be specified?% Any size can be specified from the Custom Size screen. Touch [X] or [Y], touch [<-->] to switchbetween the integer and the fraction, and then touch [–] and [+] to specify the size of the document.If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad totype in the setting. For details on switching between decimal and fraction values, refer to "SystemSettings" on page 11-13.If a decimal value is displayed in the screen and the specified value is outside the allowable range,the message "Input Error" appears. Type a value within the allowable range. If the value wasincorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.7 In the Basic screen, touch [Paper], and then select the paper tray loaded with the paper.– If settings were specified in the 2/4/8 Repeat screen, touch [Zoom] in the Basic screen, and thenspecify the zoom ratio setting.8 Specify any other desired copy settings.– To cancel the setting and select the default, press the [Reset] key.9 Using the keypad, type in the desired number of copies.10 Press the [Start] key.
