2 Basic copy operations2-60 cm6520The following procedures describe how to select Finishing settings.2 ReminderThe Staple settings are available only if the optional finisher is installed.The Punch settings are available only if the punch kit is installed on the optional finisher.Offset If no finisher is installedIf the sorting conditions are met,printed copies are fed out andsorted in an alternating criss-cross pattern.If a finisher is installedThe copies are fed out andstacked on top of each otherwith each set shifted to separateit.Fold/Bind Select one of these settings tofold copies. The copies can alsobe bound with staples at thesame time.Staple Select one of these settings tobind the copies with a staple inthe corner or with two staples.Punch Holes are punched (2 or 3 holes)in the copies for filing them.Setting Description11 14 3 2143 21 1 111114 3 214321 1 1111
