11 Utility mode11-14 cm65202 Note[Low Power Mode Settings] appears only if the "Administrator Security Levels" parameter inAdministrator mode is set.!DetailFor details on the "Administrator Security Levels" parameter, refer to "Security Settings" onpage 11-29.Output SettingsAE Level AdjustmentAuto Paper Select for Small OriginalBlank Page Print Settings2 Note[Output Settings], [AE Level Adjustment] and [Blank Page Print Settings] appear only if the"Administrator Security Levels" parameter in Administrator mode is set to "Level 2".Parameter Description Default SettingPrint/Fax Output Settings Specify settings for faxing and printing. For details, refer to the User’s Guide [Fax Oper-ations] and the User’s Guide [Print Operations].Output Tray Setting Select the copy output tray for eachtype of job (copies, printouts, faxesand reports).Copy: Tray 1Print: Tray 1Print Reports: Tray 2Fax: Tray 2Description Default SettingSpecify the initial value for auto exposure. The higher the setting, the more that the doc-ument background is emphasized.Standard (2)Description Default SettingSelect whether copying is permitted when the "Auto" Paper setting is selected and ei-ther no document is placed on the original glass or the document placed on the originalglass is too small for its size to be detected.• Copy on Small Size:The document size is determined to be A5, and copies are produced on A5-size pa-per.• Copy on A4:The document size is determined to be A4, and copies are produced on A4-size pa-per.• Prohibit Copy:Copies cannot be produced since the document size cannot be detected. Beforepressing the [Start] key, the paper tray (paper to be printed on) must be selected.Prohibit CopyDescription Default SettingSelect whether or not stamps and overlays are printed on blank pages. Do Not Print
