cm6520 1-23Before making copies 1Before making copies Chapter 1Do not turn off the machine with the main power switch or the [Power] (auxiliary power) key while it isscanning or sending or receiving data, otherwise all scan data or transmission data will be deleted.Do not turn off the machine with the main power switch while a queued job or stored data is waiting tobe printed, otherwise the jobs will be deleted.!DetailThe following are cleared when the main power switch and [Power] (auxiliary power) key are turned off.Settings that have not been programmedJobs queued to be printedAutomatically clearing settings (automatic panel reset)If no operation is performed for a specified length of time (even if the [Reset] key is not pressed), settings thathave not been programmed, such as the number of copies, are cleared and return to their default settings.This is the automatic panel reset operation.As the factory default, the automatic panel reset operation is performed after 1 minute.!DetailThe length of time until the automatic panel reset operation is performed and whether or not it isperformed can be set from Utility mode. For details, refer to "System Settings" on page 11-20.Whether or not the automatic panel reset operation is performed when there is a change of user can beset from the Utility mode. For details, refer to "System Settings" on page 11-20.
