cm6520 7-21Application functions 7Application functions Chapter 77.2 Inserting paper between OHP transparencies ("OHP Interleave"function)In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat thatis produced during copying, paper (interleaves) can be inserted between the transparencies0 No Finishing setting can be used.1 Position the document to be copied.– For details on positioning the document, refer to "Feeding the document" on page 2-6.– For details on loading OHP transparencies, refer to "Paper types and paper capacities" on page 6-3and "Loading paper into the bypass tray" on page 1-43.2 In the Basic screen, touch [Color], and then touch [Black].– Printing on OHP transparencies is possible only in black.3 Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired papertray.– Use interleaf paper with the same size as the OHP transparencies.4 Select [Transparency] as the paper type for the bypass tray, and then touch [OK].– For details on specifying the paper type settings, refer to "Specifying a setting for special paper" onpage 6-15.5 Touch [Application], and then touch [Sheet/Cover/Chapter Insert].EFGHEFGHEFGHEFGHEFGHEFGHEFGHEFGHEFGH
