cm6520 3-9Additional copy operations 3Additional copy operations Chapter 33.4 Registering copy programs (Mode Memory)Frequently used copy settings can be stored together as a program to easily be recalled. A maximum of 30programs can be registered.A name of up to 16 characters can be specified for the registered copy programs.1 Using the touch panel and control panel keys, specify the copy settings to be registered in the copyprogram.? Can the current settings be checked?% To check the currently specified copy settings, touch [Check Job] in the left panel, and then touch[Job Details]. For details, refer to "Checking the Copy Settings (Check Job)" on page 3-2.2 Press the [Mode Memory] key.The Recall Copy Program screen appears.3 From the copy program buttons that appear in the screen, touch the button where you wish to storethe copy settings, and then touch [Register Program].– There are three Recall Copy Program screens. Touch [↑] and [↓] to display a different screen.– If 30 copy programs have been registered, delete an unnecessary copy program. For details ondeleting copy programs, refer to "Deleting a copy program" on page 3-11.The Register Copy Program screen appears.4 Use the control panel keypad and the keyboard that appears in the touch panel to type in the name ofthe copy program.– The program name can contain a maximum of 16 characters.
