11 Utility mode11-68 cm6520– To stop the machine when the limit specified with account track is reached, touch [Stop Job].11 Specify a setting for "Number of User Counters Assigned".– Press the [C] (clear) key to erase the value, and then use the keypad to specify the desired value(between 1 and 999).– If user authentication and account track settings have been applied, counters can be assigned toboth accounts and users, and counts for both can be totaled.12 Touch [OK].– If the setting for "User Authentication" or "Account Track" was changed, the message "Are you sureyou want to clear all data?" appears.13 Touch [Yes], and then touch [OK].– To stop clearing the usage data without changing the settings, touch [No].– If the setting for any of the following is changed, the data is not cleared. "Public User Access","When # of Jobs Reach Maximum", or "Synchronize User Authentication & Account Track"– To cancel the setting and select the default, press the [Reset] key.The authentication method is set.Continue by specifying settings for user authentication and account track.2 ReminderDo not differentiate between uppercase and lowercase letters in the user name for the external server.Since the cm6520 cannot differentiate between uppercase and lowercase letters, the operation maynot be performed correctly.2 Note"Synchronize User Authentication & Account Track" appears if "User Authentication" is set to "ON(External Server)" or "ON (MFP)" and "Account Track" is set to "ON".If "Synchronize User Authentication & Account Track" is set to "Synchronize", even when "Public UserAccess" is set to "Allow", "Public User Access" changes to "Restrict"."Number of User Counters Assigned for Users" appears if "User Authentication" is set to "ON (ExternalServer)" or "ON (MFP)" and "Account Track" is set to "ON".If the number of user counters is set to "50", up to 950 accounts can be registered.