cm6520 2-11Basic copy operations 2Basic copy operations Chapter 2– The amount of memory available can be checked beside "Memory" in the lower-left corner of thescreen.To delete the image data, press the [Stop] key, and then delete the job. For details, refer to"Temporarily stopping scanning/printing" on page 2-79.4 After all document pages have been scanned, touch [Finish].5 Press the [Start] key.– If the "Separate Scan Output Method" parameter is set to "Batch Print", touch [Print] or press the[Start] key.– If the "Separate Scan Output Method" parameter is set to "Batch Print", the copy settings can bechanged. To change the copy settings, touch [Change Setting], and then touch [OK] after changingthe settings as desired.
