cm6520 11-31Utility mode 11Utility mode Chapter 11!DetailThe operation of the "Prohibited Functions When Authentication Error" parameter applies to thefollowing passwords.User authentication passwords, account track passwords, user box passwords, passwords forconfidential documents, and the administrator passwordIf the control panel cannot be operated even after touching [Release] from the "Prohibited FunctionsWhen Authentication Error" parameter to specify the items whose operation restrictions are canceledor if an operation is prohibited from a failed attempt to authenticate the administrator password, restartthe machine.2 ReminderWhen the machine is turned off, then on again with the main power switch, wait at least 10 seconds toturn the machine on after turning it off. The machine may not operate correctly if it is turned onimmediately after being turned off.Enhanced Security ModeHDD SettingsFunction Management SettingsDescriptionSettings necessary for applying enhanced security mode appear. Select whether or not to apply enhanced mode set-tings when the necessary settings are specified. For details, contact your service representative.Parameter Description Default SettingCheck HDD Capacity Information concerning the hard disk capacity is displayed.Overwrite Temporary Data Specify whether or not to overwrite the temporary image datasaved on the hard disk with all operations for copying, scan-ning, faxing and computer printing. For details on the set-tings, refer to the User’s Guide [Box Operations]. Byspecifying a setting to overwrite temporary data, the area ofthe hard disk where image data is saved after printing orsending can be overwritten, and the data can be erased. Thisprocess prevents disclosure of image data on the hard disk.NOOverwrite All Data Select this parameter to overwrite all data on the entire harddisk when returning or disposing of this machine in order toprevent disclosure of the data. For details on the settings, re-fer to the User’s Guide [Box Operations]. Before performingthis operation, contact your service representative.Mode 1HDD Lock Password Specify the password for protecting data on the hard disk. For details, refer to the User’sGuide [Box Operations].Format HDD Format the hard disk. For details, refer to the User’s Guide [Box Operations].HDD Encryption Setting This parameter appears when the optional security kit is installed to specify encryptionof the hard disk. For details, refer to the User’s Guide [Box Operations]. When a settingis specified, all data written to the hard disk is encrypted to protect it. If the encryptionkey is changed, the hard disk will be reformatted.Parameter Description Default SettingNetwork Function Usage Settings Specify settings for network func-tions that are difficult to count whenmanaging operations.ON
