cm6520 3-13Additional copy operations 3Additional copy operations Chapter 3The Check Job Settings screen appears.There are six Check Job Settings screens. The number to the right of the screen title indicates thenumber of the currently displayed screen.To display the previous screen, touch [←Back]. To display the next screen, touch [Forward→].If the setting for a function has been changed from the default, the button for that function appears witha colored frame.5 Check the copy settings registered with the selected copy program.6 Touch [Close].The Recall Copy Program screen appears again.7 Again touch the button for the copy program registered with the copy settings to be recalled.– If [OK] is touched with no copy program selected, the Basic screen appears again without a copyprogram being recalled.8 Touch [OK].The programmed copy settings are recalled and the Basic screen appears again.9 Press the [Start] key.Copying begins with the recalled copy settings.2 NoteTo stop recalling a copy program, press the [Reset] key or the [Mode Memory] key or touch [Cancel].
