11 Utility mode11-24 cm6520List/CounterReset Settings2 ReminderIf user authentication or account track operations are being performed, they will be canceled after 1minute, even if the "System Auto Reset" parameter has been set to "OFF". However, Enlarge Displaymode is not exited when the "System Auto Reset" parameter is set to "OFF".If user authentication settings have been specified or "Enhanced Security Mode" has been set to "ON",the logoff from Administrator mode or user authentication mode will be performed according to the"System Auto Reset Time" parameter.Parameter DescriptionManagement List Job Settings List The machine settings can be printed.Paper Size/Type Counter Store combinations of paper sizes and paper types to becounted.Parameter Description Default SettingSystem Auto Reset Specify the desired length of time until the auto-matic system reset operation is performed.• Priority Mode:Select the setting ("Copy" or "Scan/Fax") forthe mode that the machine enters when theautomatic system reset operation is per-formed.• System Auto Reset Time:Specify the setting (between 1 and 9 minutesor "OFF") for the desired length of time untilthe automatic system reset operation is per-formed.Priority Mode:CopySystem Auto ResetTime: 1 MinuteAuto Reset Select the setting (between 1 and 9 minutes or"OFF") for the desired length of time until the au-tomatic panel reset operation is performed foreach mode (Copy and Scan/Fax).Copy: 1 MinuteScan/Fax: 1 MinuteJob Reset When Account ischangedSelect whether or not the settings are reset (initial-ized) when the user has changed.This machine detects that the user has changedwhen the optional key counter has been removedor when the user has logged off if user authentica-tion or account track settings are specified.ResetWhen originalis set on ADFSelect whether or not the settings are reset whena document is loaded into the automatic docu-ment feeder.Do Not ResetNext Job Staple Setting:Select whether the same Staple setting from theprevious job is set or the setting is canceled whenthat job begins and the settings for the next jobcan be specified.OFFOriginal Set/Bind Direction:Select whether the same Original Direction andBinding Position settings from the previous job areset or the settings are canceled when that job be-gins and the settings for the next job can be spec-ified.OFFReset Data After Job:Select whether the same settings for a scan oper-ation or for a fax transmission from the previousjob are set or the settings are canceled when thatjob is completed and the settings for the next jobcan be specified. (However, even if "OFF" is se-lected, the destination is cleared.)ON