cm6520 11-27Utility mode 11Utility mode Chapter 11Account Track SettingsPrint Without AuthenticationPrinter Counter ListExternal Server SettingsLimiting Access to DestinationsAuthentication Device Settings!DetailThe Authentication Device Settings parameters are available only if the optional authentication unit isinstalled.Using Touch & Print, a user can print a job sent from a computer by positioning their finger or IC cardon the authentication unit.Parameter DescriptionAccount Track Registra-tionRegister the accounts using this machine. In addition, the password, printing permis-sions and number of prints allowed can be specified for each account.Account Track Counter The copy, print and scan/fax use for each account can be checked.Description Default SettingSelect whether or not printing is permitted without specifying a user or account. If print-ing is permitted, prints are counted for public users.RestrictDescription Default SettingThis parameter appears only if user authentication or account track settings have beenspecified. The use for each user or account can be checked.Tray 1/1-SidedDescriptionSpecify the external server that performs user authentication.Parameter DescriptionCreate Group Groups for permitting access to destinations can be registered and edited.Apply Levels/Groups to Destina-tionsThe access permission level and the group with access permissions can bespecified for each destination.Apply Levels/Groups to Users The access permission level and the group with access permissions can bespecified for each user.Parameter Description Default settingGeneral Settings Specify the settings for the installed authentication unit.• Card Authentication: Select the IC card type and op-eration settings.• Bio Authentication: Select the beep and operationsettings.When the authenticationunit (IC card type) has beeninstalled:IC Card Type: FeliCaOperation Settings: CardAuthenticationWhen the authenticationunit (biometric type) hasbeen installed:Beep Sound: ONOperation Settings: 1-to-many authenticationTouch & Print Setting Select the printing operation for Touch & Print.• ON: Select this setting to select whether all jobs oronly one job is printed.• OFF: Select this setting to prevent printing withTouch & Print.ONLogoff Settings Select whether or not the user is logged off after a scanor fax is sent or after the copy document is scanned.Do not log off
